Switching off and residual heat indicators
Switching off a cooking zone
^
Touch the display of the desired cooking zone twice.
A"0" will light up in the display for that zone for a few
seconds. If the cooking zone is still hot, residual heat will then
be indicated in the display.
Switching off the cooktop
^
Touch the s sensor.
This switches off all cooking zones. The residual heat
indicator will appear in the display of any cooking zone which
is still hot.
Residual heat indicator
The lines of the residual heat indicator go out one after
another as the cooking zone cools down. The last horizontal
line only goes out when the cooking zone is safe to touch.
Danger of burning!
Do not touch the cooking zones whilst the residual heat
indicators are lit up.
The residual heat indicators will flash if there is a power
cut during use or while residual heat is still present.
Operation
32