Switching a cooking zone off automatically
You can set a time after which the cooking zone will switch off
automatically.
This function can be used on all cooking zones at the same
time.
If the time programmed is longer than the maximum
operational time allowed, the cooking zone will switch off
after the maximum time allowed (see "Safety switch-off").
^
Select a power setting for the zone you require.
^
Touch the timer display sensor until the indicator light for
the zone you require flashes.
^ Select the time you require.
The time then counts down in minutes. The time remaining
can be seen in the timer display and changed at any time.
If you want to set another cooking zone to switch off
automatically, follow the same steps as described above.
If more than one switch-off time is programmed, the shortest
time remaining will appear in the display, and the indicator
light for that particular cooking zone will flash. All the other
indicator lights will light up constantly. If you want to check on
the remaining time for another zone, touch the timer display
until the indicator light for the zone you require flashes.
Timer
35
To Next Page
Loading...
Need help?
General
