The electrical safety of this appliance
can only be guaranteed when
continuity is complete between it and
an effective earthing system, which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested and,
where there is any doubt, the electrical
wiring in the home should be inspected
by a qualified electrician. The
manufacturer cannot be held liable for
the consequences of an inadequate
earthing system such as an electric
shock.
The manufacturer cannot be held
liable for damage which is the direct
or indirect result of incorrect
installation or connection.
Wiring diagram
N.B. This appliance is supplied
single phase only in the U.K. / AUS /
NZ
Electrical connection
56
To Next Page
Loading...
Need help?
General
