Safety features
43
Safety switch-off
Safety switch-off if the sensors are
covered
Your hob will turn off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel. will flash briefly
above the sensor and a tone will
sound.
will go out once you have removed
the object or cleaned the hob and the
hob will be ready to use again.
Safety switch-off with an overlong
cooking time
The safety switch-off mechanism is
triggered automatically if one of the
cooking zones is heated for an unusu-
ally long period of time. This period of
time depends on the power level selec-
ted. Once exceeded, the cooking zone
switches off and the residual heat indic-
ators appear. The cooking zone can be
operated again after it has been
switched off and back on.
The hob is programmed to safety set-
ting 0 at the factory. If necessary, a
higher safety setting with a shorter
maximum operating time can be set
(see chart).
Power level* Maximum operating time
[h:min]
Safety setting
0** 1 2
1 10:00 8:00 5:00
1. 10:00 7:00 4:00
2/2. 5:00 4:00 3:00
3/3. 5:00 3:30 2:00
4/4. 4:00 2:00 1:30
5/5. 4:00 1:30 1:00
6/6. 4:00 1:00 0:30
7/7. 4:00 0:42 0:24
8 4:00 0:30 0:20
8. 4:00 0:30 0:18
9 1:00 0:24 0:10
* The power levels with a dot after the num-
ber are only available if the power level
range has been extended (see "Setting
range").
** Factory default setting
To Next Page
Loading...
