Drying
26
5.Starting a program
Payment system
(optional)
If your machine is connected to a payment system, the amount of
payment required will appear in the display.
Money may be lost if the drum door is opened or the program is
canceled.
Depending on the settings, money may be lost in the payment sys-
tem if the drum door is opened or the program is canceled.
Do not open the door once the program has started.
Do not cancel a drying program while it is running.
Starting a program
The program can be started as soon as the Start/Stopsensor button
is flashing on and off.
Touch the Start/Stopsensor button.
If a delay-start period has been selected, this will appear in the dis-
play.
The drying program will start either straight away or once the delay-
start period has elapsed. The program time left is shown in the dis-
play.
Calling up current
program parame-
ters
While the program is running, you can use the pull-down menu to
view the parameters of the current drying program (e.g., drying level,
load size, selected options, drying temperature).
11:02
Time left
h
2:27
Status
Cottons
Drying
To call up the pull-down menu, swipe your finger from top to bottom
while the program is running.
lb
15
Parameter info
Normal
°F147
The pull-down menu displays the parameters of the drying program.
To close the pull-down menu again, swipe your finger from bottom
to top or press the sensor control.
Program runtime/
estimated time re-
maining
The program runtime depends on the quantity of laundry, the type of
fabric, and the residual moisture in the laundry. The displayed program
duration for drying level programs can therefore vary or “jump”. The
tumble dryer’s electronic adapts during the ongoing drying program.
The displayed program runtime becomes more and more accurate.
To Next Page
Loading...
