Miele PDR 922 - Original Spare Parts and Accessories

Optional accessories
77
Factory default settings for network configuration
You can reset all of the settings on the communication module or your integrated WiFi
module to the factory default settings. The network configuration should be reset whenever
a machine is being disposed of or sold, or if a used machine is being put into operation. This
is the only way to ensure that all personal data has been removed and the previous owner
will no longer be able to access the machine.
Copyrights and licenses
For the purpose of operating and controlling the communication module, Miele uses propri-
etary or third-party software that is not covered by open source licensing terms. This soft-
ware/these software components are protected by copyright. The copyrights held by Miele
and third parties must be respected.
This communication module contains software components which are distributed under
open source license conditions. The open source components contained in the machine
along with the corresponding copyright notices, copies of the licensing terms valid at the
time, and any additional information can be accessed locally by IP via a web browser
(https://<IP address>/Licenses). The liability and warranty arrangements for the open
source licenses displayed in this location only apply in relation to the respective rights hold-
ers.
Original spare parts and accessories
Miele machines are highly durable due to their excellent quality. If, however, repair work
does become necessary, key functional spare parts will remain available for up to 15years
following discontinuation (this does not apply to digital products or products for process
documentation).
Contact Miele Customer Service if you need spare parts and accessories or would like per-
sonalized advice.
 Danger due to improperly performed service and repair work.
Service and repair work should only be carried out by a suitably qualified electrician in ac-
cordance with all appropriate safety requirements.
Servicing, modification, testing, and maintenance of electrical machines must be carried
out in accordance with all appropriate legal requirements, accident prevention regula-
tions, and valid standards.
All live wires must be safely disconnected before any service or repair work is com-
menced on the machine.