Miele PDR 922 - Machine off Status; Delay Start; Memory; Temperature Unit

Supervisor level
33
- On (30 min.) Not curr.prog.
The display will remain on while the program is running but will go out 30minutes after
the end of the program.
- Logo (30 min.) Not curr.prog.
The display will remain on while the program is running but the logo will light up 30min-
utes after the end of the program.
- On after 30 min.
The display will go out after 30minutes.
Machine off status
In order to save energy, the tumble dryer will switch off automatically after the end of the
program or if no further selection is made. You can change this setting.
Changing this setting leads to increased energy consumption.
- No switch off
- Factory default: Switch off after 15minutes
- Switch off after 20minutes
- Switch off after 30minutes
Delay start
The delay start (timer) can be activated or deactivated.
- Factory default: Off
- On
Memory
The tumble dryer saves the settings that were selected last for a drying program (drying
level and/or extra option, or the duration for some programs).
- Factory default: Off
- On
Temperature unit
You can select the unit for the temperature display.
- Factory default: °C
- °F
Weight unit
You can decide whether load quantities are displayed in “kg” or “lb”.
- Factory default: kg
- lb
Change code
You can alter the access code to the supervisor level.
 Enter the current code.
 Enter a new code.