Electrical connection
*INSTALLATION*
158
Peak-load negotiation
The machine is suitable for use in an energy management system. For
this purpose, it must be technically adapted and the controls reset by
the Miele Customer Service Department.
Please contact the Miele Customer Service Department for further
information.
Peak load
management
In the event of a peak-load negotiation, some machine components
such as the heater element will be switched off for a while. The
machine will remain on during this period and the current programme
will not be interrupted. If one of the components that is switched off
is needed during the current programme stage, the programme
duration will simply increase for the duration of the load negotiation.
The third line of the display will alert you to the peak-load negotiation,
for example:
Universal
Temperature
Peak load cut-out
75 °C
To Next Page
Loading...
