Miele PG 8583 CD - Technical data

Technical data
179
Height with machine lid
Height without machine lid
835mm
820mm
Width
898mm
Depth
Depth with door open
598mm
1,200mm
Wash cabinet dimensions:
Height
Width
Depth of upper basket/lower basket
520mm
530mm
474mm/520mm
Weight (net)
98kg
Max. load capacity of open door
37kg
Voltage, rated load, fuse rating See data plate
Connection cable
Approx. 1.8m
Water temperature water connection:
Cold water/steam condenser
Hot water/demineralised water (optional)
Max. 20°C
Max. 65°C
Static water pressure
Max. 1,000kPa pressure
Minimum water connection flow pressure:
Cold water/steam condenser
Hot water
Demineralised water (optional)
100kPa pressure
40kPa pressure
30kPa pressure
Recommended water connection flow pressure:
Cold water/hot water
Demineralised water (optional)
Steam condenser
≥200kPa pressure
≥200kPa pressure
≥100kPa pressure
DI water connection without pressure (optional)
8.5-60kPa
Delivery head
Min. 0.3m, max. 1.0m
Drainage length
Max. 4.0m
Operation (according to IEC/EN 61010-1):
Ambient temperature
Relative humidity maximum
linear decrease to
Relative humidity minimum
5°C to 40°C
80% for temperatures up to 31°C
50% for temperatures up to 40°C
10%
Storage and transportation conditions:
Ambient temperature
Relative humidity
Air pressure
- 20°C to 60°C
10% to 85%
500hPa to 1060hPa
Altitude above sea level (according to IEC/EN 61010-1)
Up to 2,000m *
Protection category (according to IEC60529)
IP20
Soiling level (according to IEC/EN61010-1)
2
Overvoltage category (according to IEC60664)
II
Noise level in dB(A),
sound pressure LpA during cleaning and drying phases
<70
Test certifications VDE, EMC radio suppressed
marking Machinery Directive 2006/42/EC
Manufacturer address Miele & Cie. KG, Carl-Miele-Straße 29,
33332 Gütersloh, Germany
* If installed above 1,500m, the boiling point of the wash water will be lower. In this case, the disinfecting temperature and the
holding time might need to be adjusted.