Adding and dispensing chemical agents
53
Checking
consumption
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in good time to avoid the
dispensing system being sucked completely dry.
Refill indicator
When the fill level is low in the DOS 1 supply container for liquid
cleaning agent you are reminded to replenish it.
Confirm the message shown with OK and
replenish the liquid cleaning agent as described.
If the liquid cleaning agent has run out, the machine will be locked
for further use.
It will be ready for use again when the supply container has been
replaced.
Dispensing liquid
detergent
For adjusting the dispensing concentration, see “Further settings/
Dispensing systems”.
To Next Page
Loading...
