Further settings
81
Report
You can choose between two different report formats of process
reports for the purpose of archiving.
More information on selecting these can be found in “Process
documentation”.
Temperature unit
During a programme the temperature display is refreshed every 2 to 5
seconds depending on the programme stage. The temperature can
be displayed in degrees Celsius (°C) or Fahrenheit (°F).
The temperature unit is set at the factory to °C.
When the temperature unit is changed to °F, the temperature
displayed is automatically recalculated.
Open the menu as follows:
button
Further settings
Temperature unit
- °C
Display temperature in degrees Celsius.
- °F
Display temperature in degrees Fahrenheit.
Select an option using the and arrow buttons.
Press OK to save the setting.
Programme settings
You can use this menu to customise the current programme to suit
technical requirements and the load or to reset all programmes to the
factory default settings.
Additional specialist knowledge is required to alter programme
settings and this should therefore be undertaken only by experienced
users or by the Miele Customer Service Department.
More information can be found in “Programme settings”.
To Next Page
Loading...
