Miele PG 8583 CD - Further settings; Code; Date; Log book

Further settings
73
The Further settings menu incorporates all administrative processes
and settings.
The Further settings menu can only be accessed by using a code.
If you do not have the code, contact a user with appropriate
access rights or cancel the process using the  button.
In the structure overview all options which can be permanently
selected have boxes  beside them. Factory settings are indicated
by a tick . You will find an explanation of how to change settings
after the overview.
Further settings
Code
Cancel programme
Code required
Code not required
Change code
Date
Date format
DD:MM:YY
MM:DD:YY
Set
Log book
Consumption: Water
Consumpt.: Clean. agent
Consumpt.: Rinsing agent
Consumption: Neut. agent
...
Operating hours
Programme cycle counter
Service interval
Report
Short
Long
Temperature unit
°C
°F
Programme settings
Change programme
...
Reset programme
...
Air cooling
Yes
No
Release programme
All
Selection
...
Move programme
Universal
Standard
Intensive
Dispensing system
DOS_
Active
Inactive
DOS venting
Concentration
Change name
Test programme
No
Laboratory
Validation
Filter maintenance
Coarse filter/HEPA filter
Reset(Yes/No)
Filter combination
Reset(Yes/No)
Interval10