Miele PW 818 - Page 32

Washing
32
1 Cottons hygiene
40 Pre-wash
Main wash 1150 rpm
+ 



11,0/11,0
90
°C
°C
kg
The ""field is highlighted in the display.
Useful tip: The function can be deselected by pressing the button
again.
Useful tip: Press the "Starch stop" button to starch the laundry.
Useful tip: If you do not want a spin cycle after the final rinse, press
the "Without spin" button.
If you do not want to make any further changes to the programme:
 Press the "START" button.
The wash programme will start.
Changes before
starting the
programme
Changes can be made before the start of the programme, e.g. load,
temperature or spin speed:
Load
The load can be entered manually before the start of the programme.
1 Cottons hygiene 11,0 /11,0
Pre-wash
Main wash

40
90
+ 



°C
°C
kg
 Select the "Load capacity" field by turning the multifunction
selector. Press the multifunction selector to confirm your selection.
 Change the load capacity by turning the multifunction selector.
Press the multifunction selector to confirm the value.
Temperature
Before the programme starts, the temperature can be set in
1°increments from cold 15°C to the max. 95°C.
 Select the "Temperature" (40°C for pre-wash) field by turning the
multifunction selector. Press the multifunction selector to confirm
your selection.
1 Cottons hygiene 11,0/11,0
Pre-wash
Main wash

40
90
+ 



°C
°C
kg
 Change the temperature by turning the multifunction selector. Press
the multifunction selector to confirm the value.