Miele PW 818 - Starting and Monitoring Cycles

Washing
33
Spin speed
The spin speed can be changed in 25rpm increments from300 to the
maximum spin speed. No setting is possible between 0 and 300rpm.
 Select the "Spin speed" (1100rpm for final spin) field by turning the
multifunction selector. Press the multifunction selector to confirm
your selection.
1 Cottons hygiene
90 Main wash
Rinses 1150 rpm
+ 



11,0/11,0
°C
kg
 Change the spin speed by turning the multifunction selector. Press
the multifunction selector to confirm the setting.
Maximum spin
speeds
PW 811 PW 814 PW 818
1150rpm 1075rpm 1075rpm
The maximum spin speeds depend on the programmes selected.
Starting a programme
 Press the "START" button.
The wash programme will start.
After the programme has started, the programme sequence is shown
in the display.
1 Cottons hygiene
40 Pre-wash
Main wash
+

 

20
Finish at 12:35

°C °C
In the second line of the display, in this case pre-wash, the current
suds temperature is shown.
1 Cottons hygiene
90 Main wash
Rinse 1
+

 

60
Finish at 12:35

°C°C
If the pre-wash programme block is finished, the main wash
programme block will appear in the second line of the display with
the current suds temperature. The next programme block, in this case
rinse1, is shown below.
Useful tip: The "Programme finished" display on the right shows the
time that the programme will finish.