Installation and connection
72
Transport safety devices
Removing the transport safety devices
The 2 transport safety devices at the front are each secured with
3screws. The transport safety device at the back is secured with
4screws. The transport safety devices must only be removed when
the machine is in place, before it is commissioned.
Remove the front and back panels:
Unscrew the screws at the bottom of the front panel and remove
the panel.
Unscrew the screws at the bottom of the back panel and remove
the panel.
Loosen the hexagonal screws to remove the transport safety
devices.
Retain the transport safety devices. They need to be refitted should
the machine ever need to be moved again.
To Next Page
Loading...
