Miele PW 818 - Weighing System; Weighing Base; Resetting the Load Display to Zero

Optional modules
56
Weighing system / Weighing base
If the machine is equipped with a weighing base, the laundry load
weight is displayed in 0.2 kg increments during loading. The max.
loading weight for the programme is displayed beside it.
Resetting the load
display to zero
Do not place items on the machine. Do not lean against the
machine.
This can influence the result of the measurement.
If the load display does not show "0.0" with an empty drum, this can
be rectified by pressing the "0 -reset" button.
1 Cottons hygiene 0,0/18,0
Rinses

60
+   
Main wash
->I<-
1075 rpm
°C
kg
 If after resetting to 0 (taring), you discover an overlooked item in the
drum, the following will appear in the display:
1 Cottons hygiene --,-/18,0
Rinses

60
+   
Main wash
->I<-
1075 rpm
°C
kg
 Reset the display to0 using the button.
Useful tip: If the machine is overloaded, for example when laundry is
wet, it will operate in accordance with the nominal load after the
programme starts. This value is also saved in the operating data
module.
At the end of the programme when the drum has stopped rotating,
the residual moisture in the laundry is shown in the display.
1 Cottons hygiene
The door can be opened
Programme finished Residual moisture 60 %



