Miele PW 818 - Page 93

Programme chart
93
Mops Th.Dis.
+ finish
90 °C Fill ratio/Load
size
Fabric Cotton, viscose, polyester and microfibre mops
1:10
PW 811 - 11 kg
PW 814 - 14 kg
PW 818 - 18 kg
For number,
see
"Mops per load"
chart
Programme
sequence
Programme sequence as for Mops thermal
disinfection, then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
Mops Ch. Th. Dis. 60 °C
Fabric Cotton, viscose, polyester and microfibre mops
Programme
sequence
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Disinfection* 60°C, 20min.
3 rinses
Final spin
Mops Ch.Th. Dis.
+finish
60 °C
Fabric Cotton, viscose, polyester and microfibre mops
Programme
sequence
Programme sequence as for Mops chemo-
thermal disinfection*, then:
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
Mops finish
Fabric Cotton, viscose, polyester and microfibre mops
Programme
sequence
1 rinse
Finishing agent, damp
or activate block:
Damp, wet, dripping wet
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time, and dosages) must
be set on site to suit cleaning agents and disinfectants.