Delay start
31
The Delay start function can be used to
set the time until the programme starts
or the programme finish time (see
“Supervisor level - Delay start”).
Selecting Delay start
Touch the Further
selectionssensor.
Select the Finish at, Start at or
Start inoption.
Use the andsensors to enter the
hours and minutes and confirm your
entry with the OKsensor.
The minutes entry moves to the next
“full quarter of an hour” and can then
be adjusted in 15-minute increments.
Starting Delay start
Touch the Start/Stopsensor.
The door will lock and the time
remaining until the programme starts
will appear in the display.
Cancelling or changing Delay
start
Touch the Start/Stop sensor.
The following will appear in the display:
Add laundry
Cancel
programme
Start programme
immediately
Touch the Start programme immediately
sensor.
The wash programmes starts
immediately.
or
Touch the Cancel programme sensor.
The programme start is cancelled and
the Start/Stopbutton flashes on and
off.
To Next Page
Loading...
Need help?
General
