Miele PWM 507 Hygiene User Manual

Supervisor level
69
Language
The display can be set to appear in
one of several different languages. You
can selected the permanent operator
language via the Language submenu.
When a programme is running, you can
change the user language using the
sensor control.
Brightness
The brightness of the display can be
set in intervals of ten from 10% to
100%.
Factory setting: 70%
Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– 24 h clock (factory setting)
– 12h clock
– Clock off
Set
– The time can be set.
Finish tone volume
The volume for the signal tone that
sounds at the end of the programme
can be changed.
The tones can be set to one of 7
different levels or switched off
altogether.
Factory setting: Off
Keypad tone
The volume of the tone that sounds
when a sensor is touched can also be
changed.
The tones can be set to one of 7
different levels or switched off
altogether.
Factory setting: Normal
Welcome tone volume
The volume of the welcome tone that
sounds when the washing machine is
switched on can be changed.
The tones can be set to one of 7
different levels or switched off
altogether.
Factory setting: Normal
Fault alarm
The signal tone that sounds in the
event of a fault can be switched on or
off.
Factory setting: Off
Memory
The washing machine will save the
latest settings (temperature, spin
speed and some of the options) which
have been selected for a programme
after the programme has started.
When the programme is selected again,
the saved settings will appear in the
display.
Factory setting: Off

Miele PWM 507 Hygiene Specifications

General

Brand	Miele
Model	PWM 507 Hygiene
Category	Washer
Language	English