Miele PWM 507 Hygiene User Manual

Supervisor level
78
Feedback signal to pay system
Setting the feedback signal for the
payment system.
– Factory setting: Off
– Programme end
The feedback signal is sent at the
end of the programme.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and end of programme
The feedback signal is sent at the
start and end of the programme.
– Running programme
The feedback signal is sent
continuously from the start until the
end of the programme.
Clear paid signal
The “Paid” signal in payment system
mode can be applied until the end of
the programme or discarded if the
programme has not been started after
5minutes.
Factory setting: Off
Payment system lock
To avoid tampering, a programme lock
can be set up in programme
operation. If the lock is applied, the
programme is interrupted and
payment credit is lost as soon as the
door is opened.
To offer the possibility to add laundry,
the time when the lock activates can be
adjusted.
– Off
– As soon as the programme starts
– 1 minute after the start of the
programme
– 2 minutes after the start of the
programme
– 3 minutes after the start of the
programme (factory setting)
– 4 minutes after the start of the
programme
– 5 minutes after the start of the
programme
FOC programmes
In payment system mode, you can
decide whether the Drain/Spin
programme can be used for free.
Factory setting: Off

Miele PWM 507 Hygiene Specifications

General

Brand	Miele
Model	PWM 507 Hygiene
Category	Washer
Language	English