Lock
The system lock prevents your
machine being used without your
knowledge.
When the system lock has been
activated, you have to enter a code
after switching the dryer on. Otherwise
the dryer cannot be operated.
To activate the lock
C Back A
X
Activate ...
^ Select
activate
and confirm your
selection.
^ The display will now request that a
code is entered. The code is 250 and
cannot be altered.
To enter the lock code
The code is: 250
0 __
Enter lock code
^
Use the + button to enter the first
number. Confirm your selection of
this number by pressing the
OK
button. Now set the second number.
^
Repeat the process until all three
numbers have been entered.
^
After the last number has been
entered, press the
OK
button.
Yes
250
No
Confirm lock code
^
Confirm the code with the
OK
button
or if you want to correct a mistake,
press the - button.
The lock will now be activated when the
dryer is switched off.
To unlock the dryer
When the machine is switched on
again, the display will request the lock
code.
^ Enter lock code 250 as described
above and confirm the entry.
W
Entry OK
Lock deactivated
The dryer is now unlocked.
To deactivate the lock
Proceed as for activating the lock.
Settings menu J
53
To Next Page
Loading...
