EasyManua.ls Logo

Miele WCE 330 - Darks; Denim; Outerwear; Proofing; Drain;Spin

Miele WCE 330
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programme chart
34
Darks / Denim Cold to 60°C Max. load 3.0 kg
Items Black and dark garments made from cotton, mixed fibres and
denim.
Notes Wash inside out.
Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
Outerwear Cold to 40°C Max. load 2.5 kg
Items Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER® etc.
Notes Zip up or close jackets before washing.
Do not use fabric softener.
If required, these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time the
garment is washed.
Proofing 40°C Max. load 2.5 kg
Items Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes The items should be freshly laundered and spun or dried before
proofing.
For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Drain/Spin Max. load 8.0 kg
Notes Drain only: Select 0 rpm for the spin speed.
Make sure you select the appropriate spin speed.

Table of Contents

Related product manuals