Miele WCE 330 - Extras; Selecting Extras; SingleWash; Pre-ironing

Extras
37
You can use the Extra option sensors to
augment the wash programmes.
Selecting Extras
Extras are selected or deselected using
the sensors in the control field.
Additional Extras can be selected from
the display using the Extras sensor.
 Touch the sensor for the Extra you
want.
The relevant sensor will light up brightly.
Not all the Extras can be used with
every programme.
An Extra that is not permitted for the
wash programme is not lit dimly and
cannot be activated by touch.
SingleWash
For efficiently washing a very small load
(<1kg) in a normal wash programme.
The wash duration is reduced.
Please note the following advice:
– Use liquid detergent
– Reduce the dosage to a maximum of
50% of the amount quoted for a
½load
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Follow the instructions in the
display. Small loads give a better result.
The garments must be suitable for
drying in a tumble dryer   and
suitable for ironing  .
Water +
The water level in the wash and rinse
stages is increased and a second rinse
is carried out in the “Separate rinse/
Starch” programme.
You can select other functions for the
Water + sensor control. These are
described in “Settings”.