Miele WCE 330 - Soak duration; Gentle action; Temp. reduction; Water plus

Settings
82
Soak duration
You can set a duration for the soak
process of between 30minutes and
6hours.
A duration can be selected in 30-minute
increments. When the Soak Extra is
selected, the laundry will be soaked for
the duration selected.
A duration of 0:30h is set as standard.
Gentle action
With gentle action activated, drum
agitation is reduced. In this way, lightly
soiled items can be washed more
gently.
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
Gentle action is deactivated as
standard.
Temp. reduction
At high altitudes water has a lower
boiling point. Miele recommends
activating the reduce temperature
setting at altitudes of 2000m or above
to prevent water from boiling. The
maximum temperature is reduced to
80°C even if a higher temperature is
selected.
The reduce temperature setting is
deactivated as standard.
Water plus
You can increase the amount of water
delivered in the wash programmes.
Options
– Extra water (factory default setting)
The water level is increased in the
wash and rinse stages of the
programme.
– Extra rinse
An additional rinse cycle is carried
out.
– Extra water + rinse
The water level is increased in the
wash and rinse stages and an
additional rinse is carried out.
Water plus level
There are four different water levels
which can be selected by activating
the Water + Extra.
Levels
– Normal (factory default setting)
– Plus 
– Plus 
– Plus 