Miele WCE 330 - Disp. switch-off stat.; Programme info; Memory; Long p-wash Cotton

Settings
81
Disp. switch-off stat.
The display and the sensor control
lighting is switched off to save energy.
The Start/Stop sensor flashes slowly.
Options
– On
Lighting switches off after
10minutes.
– On (not current pr.) (factory default
setting)
Lighting remains switched on
throughout the programme. The
lighting switches off 10minutes after
the programme has ended.
– Off
The lighting remains switched on.
Programme info
You can select the information that will
be displayed temporarily in the display
after a programme has been selected.
Options
– Programme name
The programme name is shown in the
display for several seconds.
– Prog. & max load (factory default
setting)
The programme name and the
maximum load are shown in the
display for several seconds.
– Off
Directly after the programme has
been selected, the standard display
is shown with temperature, spin
speed, and programme duration.
Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the Extras) selected for a
programme after the programme has
started.
When the programme is chosen again,
the saved settings will appear in the
display.
Memory is deactivated as standard.
Long p-wash Cotton
If you require a longer pre-wash, you
can extend the Cottons programme's
standard pre-wash time of 25 minutes.
Options
– No increase (factory default setting)
25-minute pre-wash.
– + 6 min
31-minute pre-wash.
– + 9 min
34-minute pre-wash.
– + 12 min
37-minute pre-wash.