Miele WCE 330 - Load; Energy; Water; Duration

Consumption data
77
Load Energy Water Duration Residual
moisture
kg kWh Litres h:min %
Cottons 90°C 8.0 2.40 57 2:29 50
60°C 8.0 1.35 57 2:29 50
60°C 4.0 1.00 48 2:19 50
 8.0 0.84 48 2:59 49
 4.0 0.83 46 2:59 49
40°C 8.0 0.98 72 2:39 50
40°C 4.0 0.65 48 2:39 50
 4.0 0.34 39 2:59 49
20°C 8.0 0.38 72 2:39 50
Minimum iron 30°C 4.0 0.34 52 1:59 30
Delicates 30°C 3.0 0.20 40 1:09 –
Woollens  30°C 2.0 0.23 35 0:39 –
Automatic plus 40°C 6.0 0.60 59 1:59 –
QuickPowerWash 40°C 5.0 0.75 45 0:59 –
Express 20
1)
40°C 3.5 0.33 30 0:20 –
Shirts
2)
60°C 2.0 0.66 40 1:31 –
1)
Quick sensor activated
2)
Pre-ironing option deactivated
For labelling parameters conforming to AS/NZS 2040.1 & AS/NZS 2040.2, please
refer to the previous page of this booklet.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any Extras selected.
With the PowerWash 2.0 washing technique, during the heating phase, the
temperature measured by the sensor in the suds container is higher than the
actual temperature of the laundry.
The temperature measured there does not reflect the temperature of the
laundry.