Before using for the first time
16
Running the first programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottonsprogramme
must be run without laundry and
without detergent.
Open the stopcock.
Turn the programme selector to the
Cottonsposition.
The washing machine is now switched
on and in the control field, the
temperature 60°C lights up.
Touch theStart/Add laundry sensor
control.
The programme will start.
After 10minutes, the indicators dim,
except for theStart/Add laundry
sensor control.
Opening the door at the end of
the programme
The door remains locked during the
anti-crease phase. The control field
lights up for the first 10minutes. The
control field then goes out and
theStart/Add laundry sensor control
flashes.
Turn the programme selector to the
position.
appears on the timer display and
the indicator light goes out.
The door unlocks.
Tip: After the anti-crease phase, the
washing machine will have switched off
and the door unlocked automatically.
The control field will be completely
dark.
Take hold of the door and pull it
open.
Tip: Leave the door slightly open to
allow the drum to dry.
Initial commissioning is now complete.
To Next Page
Loading...
Need help?
General
