EasyManuals Logo

Miele WWD320 WCS User Manual

Miele WWD320 WCS
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Problem solving guide
50
During the programme, a symbol appears in the time display
Message Cause and remedy
 lights up The programme selector was moved to a different
position after the programme had started.
Turn the programme selector back to the original
position.
At the end of the programme, an indicator light lights up in the
control panel
Problem Cause and remedy
The indicator light
lights up.
Excessive foam has built up during washing.
Use less detergent next time, and follow the
manufacturer's recommended dosage amounts on
the packaging.
The indicator light
lights up.
When washing, a wash programme using a
temperature above 60°C has not been run for a long
time.
Run the Cottons90°C programme using Miele
machine cleaner or a universal powder detergent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
and appear
alternately on the time
display.
The Pre-ironingextra which runs at the end of the
programme could not be carried out properly.
Check whether the washing machine is aligned
correctly (see “Installation – Levelling the
machine”).
Check whether the maximum drainage head
height of 1m has been exceeded.
If the fault message appears again, contact the Miele
Customer Service Department. The washing machine
can still be used, but without the Pre-ironing extra.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele WWD320 WCS and is the answer not in the manual?

Miele WWD320 WCS Specifications

General IconGeneral
Capacity8 kg
Energy Efficiency ClassA+++
Spin Speed1400 rpm
Noise Level (Spin)74 dB
Dimensions (HxWxD)850 x 596 x 636 mm
ColorWhite
TypeFront-loading
Noise Level (Wash)50 dB

Related product manuals