Miele WWD320 WCS - Programmable Functions; Accessing and Customizing Functions

Programmable functions
73
The programmable functions are used
to alter the washing machine’s
electronics to suit changing
requirements. Programmable
functions can be altered at any time.
Opening the programming
level
Programming is carried out in 8steps
(, , ...) using the sensor
controls.
Prerequisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
 Touch the Start/Add laundrysensor
control and hold it down while
carrying out steps –.
 Close the washing machine door.
Wait until the Start/Add laundry sensor
control lights up constantly...
 ...and then release the Start/Add
laundry sensor control.
After approximately 4seconds,  will
light up on the time display.
Choosing and selecting a
programmable function
The number of the programmable
function will appear in the time display
as and a number: e.g..
 Touch the or sensor control to
scroll to the next or previous
programmable function:
Programmable functions
 Buzzer duration
 Buzzer
 Keypad tone
 PIN code
 Control field switch-off behaviour
 Memory
 Additional long pre-wash – Cottons
 Gentle action
 Reduced temperature
 Water plus
 Water plus level
 Maximum rinse level
 Suds cooling
 Anti-crease
 Low water pressure
 Display brightness dimmed
 Operating hours
 Factory default
 Confirm the selected programmable
function by touching theStart/Add
laundry sensor control.