Changing the programme sequence
39
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been
successfully started. This prevents the
machine being operated unintentionally,
e.g. by children.
If the washing machine is switched off
during active programme operation,
the standby function does not switch
the washing machine off completely
after 15minutes. Safety functions
continue to be active because there
may still be water inside the drum.
Cancelling a programme
You can cancel a programme at any
time after it has started.
Turn the programme selector to the
position.
Turn the programme selector to any
position.
Rotating bars ...... or
are shown on the time display.
The water is pumped away and the
door lock is then released.
Selecting a new programme
Turn the programme selector to the
required programme.
Check that there is still detergent in
the detergent drawer. Add more
detergent if there is none left.
Touch theStart/Add laundry sensor
control.
To Next Page
Loading...
Need help?
General
