Delay start
29
With Delay start you can choose when
you want the programme to start. You
can delay the start of the programme by
30minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
Selecting Delay start
Delay start is not possible in the Drain/
Spin and Proofingprogrammes.
Select the programme required.
Touch the sensor control.
The sensor control lights up brightly.
Touch the or sensor control
repeatedly until the required Delay
start time appears on the time
display.
- In the case of settings below
10hours, the Delay start time
changes in increments of 30minutes
- In the case of settings above
10hours, the Delay start time
changes in increments of 1hour
Starting Delay start
Touch the flashingStart/Add laundry
sensor control.
The Delay start process starts and
counts down on the time display.
Changing or cancelling a started
Delay start
If the selected Delay start function has
started, it is no longer possible to
change the time.
Turn the programme selector to the
position.
Turn the programme selector to any
programme.
Rotating bars ...... or
are shown on the time display.
The door lock is released.
Select a programme and a new Delay
start time.
To Next Page
Loading...
Need help?
General
