Miele WWD320 WCS User Manual

5. Start the programme
26
Starting a programme
 Touch the flashingStart/Add laundry
sensor control.
The door locks and the programme
starts.
If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or
immediately after the programme has
started, the programme duration
appears on the time display.
Energy savings
After 10minutes, the indicators dim.
The sensor controlStart/Add laundry
flashes.
To reactivate the indicators:
 Touch theStart/Add laundry sensor
control (this does not have any effect
on a programme that is running).
Adding laundry during a
programme sequence
(AddLoad)
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated on the control field.
 Touch the Start/Add laundrysensor
control.
Rotating bars ...... are
shown in the time display.
If the word appears on the time
display, the door can be opened.
 Open the door and add or remove
laundry.
 Close the door.
 Touch the Start/Add laundrysensor
control.
The wash programme will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 55°C
- The water inside the drum is above a
certain level

Miele WWD320 WCS Specifications

General

Capacity	8 kg
Energy Efficiency Class	A+++
Spin Speed	1400 rpm
Noise Level (Spin)	74 dB
Dimensions (HxWxD)	850 x 596 x 636 mm
Color	White
Type	Front-loading
Noise Level (Wash)	50 dB