Migatronic PI 400 PLASMA - Technical Data and Control System; Technical Specifications

19
TECHNICAL DATA
Power source: PI 400 PLASMA
Mains voltage (50Hz-60Hz) 3 x 400 V ±15%
Fuse 25 A
Mains current, effective 17.5 A
Power, (100%) 12.1 kVA
Power, max 19.7 kVA
Open circuit power 40 W
Current range 5-400 A
Open circuit voltage 95 V
1
Application class
S
2
Protection class (IEC 529) IP 23
Standards
EN/IEC60974-1
EN/IEC60974-2
EN/IEC60974-3
EN/IEC60974-10
Dimensions (hxwxl) (cm) 98x54.5x109
Weight 67 kg
Cooling unit:
Cooling efficiency 1.2 kW
Tank capacity 3.5 litres
Standard EN/IEC60974-2
Flow 1.75 l/min – 1.2 bar – 60°C
Pressure max. 3 bar
Function: Process Value range
Arc-power Electrode 0-100 %
Hot-start Electrode 0-100 %
Anti-freeze TIG/Electrode always on
Start AMP TIG 10-200 %
Stop AMP TIG 1-90 %
Slope-up TIG 0-20 secs
Slope-down TIG 0-20 secs
Gas pre-flow TIG 0-10 secs
Gas post-flow TIG 0-20 secs
Spot welding time TIG 0-600 secs
Pulse time TIG/MMA 0.01-10 secs
Pause time TIG/MMA 0.01-10 secs
Base AMP TIG/MMA 10-90 %
Second current (Bilevel) TIG 10-200%
Shield gas flow TIG 4.0- 24.0 l
Pilot arc intensity PLASMA 3-20A
Plasma gas flow PLASMA 0.1-7.0l
Plasma gas slope-down PLASMA 0-20 secs
Plasma gas final value PLASMA 0.1-7.0 l
TIG-ignition TIG HF / LIFTIG
Triggerfunction TIG 2/4-stroke
1
S
The machine meets the standards which are demanded of machines working in areas where there is an increased risk of electric shock
2
Equipment marked IP23 is designed for indoor and outdoor applications