Milesight VS133 - Page 32

32
04
d2 (Accumulated counter)
Line 1 accumulated out counter, 4 bytes
05
cc (Periodic counter)
Line 1:
Byte 1-2: in counter during the report interval
Byte 3-4: out counter during the report interval
06
d2 (Accumulated counter)
Line 2 accumulated in counter, 4 bytes
07
d2 (Accumulated counter)
Line 2 accumulated out counter, 4 bytes
08
cc (Periodic counter)
Line 2:
Byte 1-2: in counter during the report interval
Byte 3-4: out counter during the report interval
09
d2 (Accumulated counter)
Line 3 accumulated in counter, 4 bytes
0a
d2 (Accumulated counter)
Line 3 accumulated out counter, 4 bytes
0b
cc (Periodic Counter)
Line 3:
Byte 1-2: in counter during the report interval
Byte 3-4: out counter during the report interval
0c
d2 (Accumulated counter)
Line 4 accumulated in counter, 4 bytes
0d
d2 (Accumulated counter)
Line 4 accumulated out counter, 4 bytes
0e
cc (Periodic Counter)
Line 4:
Byte 1-2: in counter during the report interval
Byte 3-4: out counter during the report interval
0f
e3 (Region Monitoring)
Byte 1: number of people in region 1 currently
Byte 2: number of people in region 2 currently
Byte 3: number of people in region 3 currently
Byte 4: number of people in region 4 currently
10
e4 (Region Monitoring)
Byte 1: region ID
Byte 2-3: avg. dwell time
Byte 4-5: max. dwell time
Note: If children distinction feature or staff detection feature is enabled, the counter uplinks will
minus children and staff. For example, if children distinction is enabled, the accumulated in
counter=total in counter-children in, the accumulated out counter=total out counter-children out.
Example:
1. Device information.
ff0101 ff166600b09409760000 ff090102 ff1f85010001
Channel
Type
Value
Channel
Type
Value
ff
01
(Protocol
Version)
01 (V1)
ff
16(Device
SN)
66 00 b0 94
09 76 00 00