Milesight VS133 - Report

17
Number of
Detection
When rejoin mode is enabled, set the number of detection.
Note: the actual sending number is Number of Detection + 1.
LoRaWAN
®
Version
V1.0.2, V1.0.3 are available.
Region
Frequency plan of this device.
RX2 Data Rate
RX2 data rate to receive downlinks.
RX2 Frequency
RX2 frequency to receive downlinks.
Spreading Factor
If ADR is disabled, the device will send data via this spreading factor.
Channel
Select the channel from channel list or enter the index to select the
frequency channel.
Index examples:
1, 40: Enabling Channel 1 and Channel 40
1-40: Enabling Channel 1 to Channel 40
1-40, 60: Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
Confirm Mode
If the device does not receive ACK packet from network server, it will
resend data once.
ADR
Allow network server to adjust data rate of the device.
Note:
1) Please contact sales for device EUI list if there are many units.
2) Please contact sales if you need random App keys before purchase.
3) Only OTAA mode supports rejoin mode.
4) Select OTAA mode when you connect device to Milesight IoT Cloud.
5.4 Report
VS133 supports to visual line chart or bar chart generation to display people traffic and supports
report exporting. Before using this feature, ensure that the device time is correct on System
page.