Milesight WS202 - Downlink Commands

17
Channel
Type
Value
Channel
Type
Value
01
75 (Battery)
64 => 100%
03
00 (PIR Status)
01=> Occupied
Channel
Type
Value
04
00 (Light
Status)
01=> Bright
5.3 Downlink Commands
WS202 supports downlink commands to configure the device. The application port is 85 by
default.
Channel
Type
Description
ff
03 (Set Reporting Interval)
2 Bytes, unit: s
10 (Reboot)
ff (Reserved)
Example:
1. Set reporting interval as 20 minutes.
ff03b004
Channel
Type
Value
ff
03 (Set Reporting
Interval)
b0 04 => 04 b0 = 1200s
= 20 minutes
2. Reboot the device.
ff10ff
Channel
Type
Value
ff
10 (Reboot)
ff (Reserved)
-END-