24
The software does not allow Chiller and Defrost programs in the same time. For example, if you try to start a
defrost program during the chiller time you will have the following message:
Or if you start a defrost program that will end during a chiller program, the message will be:
To reset all the week programs, press on the “Reset program” button, while to cancel only one program,
select it and press the “Reset selected” button, answering YES to the relative question.
Save settings, by clicking on YES to the exit question:
Activate the automatic mode by pressing the icon to render it green (active):
in the main page.
Then the main screen shows icons for use in manual mode OFF (grey color):
Defrost cycle duration depends on Milestone default settings, accessible only to Service
personnel. Contact application@milestonemedsrl.com for further information.
To Next Page
Loading...