10. SAFETY MEASURES
The milk cooling tank is fitted with safeguards at all its moving parts. Access to the interior of the electric panel requires the
use of a screwdriver and is in accordance with the requirements for the safeguards of the directive 98/37/ΕΚ
The electric parts of the installation are adequately covered in order to be safe in use (ex: wires).
The surface of the milk cooling tank is smooth, continuous and formed so as to reduce milk entrapment in small cracks and
decrease bacteria contamination which can cause infection in the milk. Furthermore, the surfaces are cleanable and easy to
disinfect where needed.
Inaccessible places are constructed in such a way so as to be easily cleanable.
The bearings are fitted at the out-of-food area. Their lubrication is performed by the use of special lubricant suitable for food.
Before maintenance or cleaning, make sure that the milk cooling tank has been disconnected from electricity.
Always remember: Proper cleaning and maintenance of the machine makes your job more productive and safe.
Do not remove the signs from the machine.
After your work is finished, cover the machine with a dustsheet in order to prevent dust from collecting on the tank
or falling into an opened tank. Place all the protective covers in place.
To Next Page
Loading...
