1. PRODUCT INTRODUCTION
Your new MILKPLAN milk cooling tank is designed and manufactured by experts in cooling and conserving milk. It is constructed
using the most modern equipment and technology.
Milk refrigeration is accomplished via a stainless steel straight direct expansion evaporator plate, operated in an economical
way and for maximum performance.
The materials used for the construction of the milk cooling tank are of the highest quality in the European Trade Market and
guarantee a long life and reliable operation.
The controller is an Italian Dixell type with an error of less than 1%.
The agitator motor is made in France by Sirem and its power is 90W/230V/30 rpm (in types of 50 ~ 1200 lit).
The closed type condensing unit is made by L’Unite Hermetique, a trusted name in the European compressor market.
The base of the milk cooling tank has been designed for safe operation and easy maintenance. The refrigerating unit and the
control panel are well protected from external environmental conditions and from small animals and rodents that could enter
the refrigerating unit and cause damage.
2. SAFETY RULES AND GENERAL INSTRUCTIONS
During the design and construction of this machine everything has been done to make your job more efficient and secure.
However, caution is of great importance. Prevention is better than regulation.
This machine is designed and constructed according to the Annex V directive 98/37 EU and the ΕΝ 292-1, ΕΝ 292-2, ΕΝ 294,
ΕΝ 349, ΕΝ 418, ΕΝ 1672-1, ΕΝ 1672-2, ΕΝ 60204-1standards.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important oper-
ation and maintenance (service) instructions in this manual. Upon seeing you are highly advised to pay attention to
the warning and be careful of any accidents.
After this symbol an instruction follows.
3. PRODUCT INTRODUCTION
ATTENTION! This manual is an integral part of the milk cooling tank and must be kept nearby in a safe place. This
should be made known to all users. Do not expose this manual to rain or moisture.
Read this manual regardless of your previous experience. A few moments of careful reading will save time and will prevent
many problems. Carefully read the instructions before the start-up of the machine, normal use, maintenance or other functions
on the machine, paying close attention to the following orders and warnings.
Place warning stickers on the machine and replace immediately if they have been lost or are not readable.
To Next Page
Loading...