Miller Classic Series User Manual

TABLE OF CONTENTS
SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS −READ BEFORE USING 1......
1-1. Symbol Usage 1............................................................
1-2. Arc Welding Hazards 1.......................................................
1-3. Proposition 65 Warnings 2....................................................
1-4. Lens Shade Selection Table 3.................................................
1-5. Principal Safety Standards 3..................................................
SECTION 2 − SPECIFICATIONS 4.....................................................
SECTION 3 − OPERATING INSTRUCTIONS 5..........................................
3-1. Helmet Controls 5...........................................................
3-2. Reset Button And Low Battery Indicator 7.......................................
3-3. Mode Control (Vsi Helmet Only) 8..............................................
3-4. Lens Delay Control 9.........................................................
3-5. Variable Shade Control 10.....................................................
3-6. Sensitivity Control 11..........................................................
SECTION 4 − ADJUSTING HEADGEAR 12.............................................
SECTION 5 − REPLACING THE LENS COVERS 13.....................................
5-1. Replacing Outside Lens Cover On Variable Shade And Standard Fixed Shade Helmets 13
5-2. Replacing Inside Lens Cover On Variable Shade and Standard Fixed Shade Helmets 14.
5-3. Replacing Lens Covers On VSi Helmet 15........................................
5-4. Replacing Grinding Shield On VSi Helmet 16......................................
5-5. Replacing Lens Covers And Grinding Shield On Fixed Shade Flip-Up Helmets 17.......
SECTION 6 − REPLACING THE BATTERY 18..........................................
6-1. Replacing Battery On Variable Shade Helmets 18..................................
6-2. Replacing Battery On Vsi Helmet 18.............................................
6-3. Solar Cell On Fixed Shade Helmets 19...........................................
SECTION 7 − INSTALLING OPTIONAL MAGNIFYING LENS 20...........................
SECTION 8 − MAINTENANCE AND STORAGE 21......................................
SECTION 9 − TROUBLESHOOTING 22................................................
SECTION 10 − PARTS LIST 24.......................................................
SECTION 11 − LIMITED WARRANTY 29...............................................

Miller Classic Series Specifications

General

Arc Sensors	2
Product Line	Classic Series
Manufacturer	Miller Electric
Category	Welding Accessories
Type	Auto-darkening