OM-256 476 Page 12
3-7. Typical Lens Adjustment Procedure
Lens assembly displays prior
settings when turned On. Re-
tained settings are not shown
in example.
In the Grind mode the lens is a
fixed shade No. 3. No lens ad-
justments are possible.
X-Mode is not present on
Pro-Hobby and Performance
helmets. Cut mode is not
present on Pro-Hobby hel-
mets.
Adjusting Lens Assembly:
Turn lens On. Display screen
appears.
Select mode (Weld, Cut, Grind,
X-Mode).
Select shade by pressing LTR
and DKR buttons.
Select Delay by pressing
Short and Long buttons.
Select Sensitivity by pressing
Less and More Buttons.
Begin work.
To Next Page
Loading...
