Miller Digital Performance Series User Manual

OM-256 476 Page 19
SECTION 6 − REPLACING THE BATTERY
To replace the batteries, remove
the auto-darkening lens
assembly (see Section 5).
1 Battery Tray
After removing the lens assem-
bly, slide the battery holding trays
out and remove the old batteries.
Replace with CR2450 lithium
type batteries (2 required) or
equivalent (Miller Part No.
217043).
 Be sure Positive (+) side of
the battery faces up (toward
inside of helmet).
Reinstall the battery trays. To
test, press the On button. The
display screen should turn on.
Reinstall the lens assembly.
 Left and right battery trays
are not interchangeable in
the Digital Elite lens as-
sembly. The auto−darkening
helmet will not work if battery
trays are installed on the
wrong sides.
1
Be sure Positive
(+) side of battery
faces up.
Digital Elite Lens
Digital Pro-Hobby Lens
Digital Performance Lens
1
1

Miller Digital Performance Series Specifications

General

Brand	Miller
Model	Digital Performance Series
Category	Motorcycle Accessories
Language	English