To Next Page

To Previous Page

TABLE OF CONTENTS

SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS −READ BEFORE USING 1......

1-1. Symbol Usage 1.............................................................

1-2. Arc Welding Hazards 1.......................................................

1-3. Proposition 65 Warnings 2....................................................

1-4. Lens Shade Selection Table 3.................................................

1-5. Principal Safety Standards 3..................................................

SECTION 2 − SPECIFICATIONS 4.....................................................

SECTION 3 − OPERATING INSTRUCTIONS − TITANIUM 7300/9400 HELMETS 5............

3-1. Helmet Configurations (Titanium 7300 And 9400 Series Helmets) 5..................

3-2. Helmet Controls (Titanium 7300 And 9400 Series Helmets) 6.......................

3-3. Auto On/Off Button And Grind Mode / Low Battery Light

(Titanium 7300 And 9400 Series Helmets) 7......................................

3-4. Mode Control Button (Titanium 7300 And 9400 Series Helmets) 8...................

3-5. Variable Shade Control (Titanium 7300 And 9400 Series Helmets) 9.................

3-6. Lens Delay Control (Titanium 7300 And 9400 Series Helmets) 10....................

3-7. Sensitivity Control (Titanium 7300 And 9400 Series Helmets) 11.....................

3-8. Typical Lens Adjustment Procedure 12..........................................

3-9. Info Control Button (Titanium 7300 And 9400 Series Helmets) 13....................

3-10. Arc Time Control (Titanium 7300 And 9400 Series Helmets) 14......................

3-11. Clock Control (Titanium 7300 And 9400 Series Helmets) 15........................

3-12. Timer Control (Titanium 7300 And 9400 Series Helmets) 16........................

3-13. Alarm Control (Titanium 7300 And 9400 Series Helmets) 17........................

SECTION 4 − OPERATING INSTRUCTIONS − TITANIUM 1600/1600i HELMETS 18..........

4-1. Controls − Titanium 1600 And 1600i Series Helmets 18............................

SECTION 5 − ADJUSTING HEADGEAR 19.............................................

5-1. Adjusting Headgear On Titanium 7300 And 9400 Series Helmets 19.................

5-2. Adjusting Headgear On Titanium 1600 And 1600i Series Helmets 20.................

SECTION 6 − REPLACING THE GRINDING SHIELD OR LENS COVERS 21................

6-1. Replacing Grinding Shield On 9400i And 1600i Helmets 21........................

6-2. Replacing Lens Covers On Quick Release Helmets 22............................

SECTION 7 − REPLACING THE BATTERY (AUTO-DARKENING LENS ASSEMBLIES) 23....

7-1. Replacing The Battery In Titanium 7300 And 9400 Series Helmets 23................

SECTION 8 − INSTALLING OPTIONAL MAGNIFYING LENS 24..........................

SECTION 9 − MAINTENANCE 24.....................................................

SECTION 10 − TROUBLESHOOTING 25...............................................

SECTION 11 − PARTS LISTS 26......................................................

SECTION 12 − LIMITED WARRANTY 35...............................................

Miller Titanium 9400 User Manual

Questions and Answers: