Introduction
Elix® 20, 35, 70 and 100 1
Chapter 1 INTRODUCTION
1-1 USING THIS MANUAL
MATCHING THIS MANUAL WITH YOUR WATER PURIFICATION SYSTEM
This manual is intended for use with a Millipore SAS Elix 20, Elix 35, Elix 70 or Elix 100 Water Purification System.
This User Manual is a guide for use during the normal operation and maintenance of an Elix 20, Elix 35, Elix 70 or Elix 100 Water
Purification System. It is highly recommended to completely read this manual and to fully comprehend its contents before
attempting normal operation or maintenance of the Water Purification System.
You can easily identify your type of Water Purification System if you do not see the Catalogue Number. The type of Elix System
is indicated above the Keypad on the front of the Elix System Cabinet.
If this manual is not the correct one for your Water Purification System, then please contact Millipore SAS.
INSTALLATION INFORMATION
IMPORTANT! INSTALLATION INSTRUCTIONS ARE NOT INCLUDED. INSTALLATION
OF THIS PRODUCT IS MEANT TO BE PERFORMED BY A QUALIFIED MILLIPORE SAS
SERVICE REPRESENTATIVE.
The Pre-Installation
and Installation Documentation for the Elix Systems mentioned
above are not found in this Manual. Contact Millipore SAS if you would like to
have this information.
Appendix 2 contains a Pre Installation Checklist and Appendix 3 contains a Post Installation Checklist. These can be used to
confirm that you received the necessary items for installation and also that the Elix System was installed according to
specifications.
To Next Page
Loading...
Need help?
General
