4
Pellerin Milnor Corporation
1 Machine Description and Identification
BNUUUF02 / 2021442
BNUUUF02 0000369288 A.6 10/25/21 9:27 AM Released
1.1 About This Manual and Your Milnor® Machine
BNUUUF02.C01 0000369287 A.5 A.6 A.9 10/14/21 8:55 AM Released
This manual applies to two or more models that share the mechanical characteristics stated below.
If you received this manual with your machine, your machine is one of the applicable models.
However, before using this manual, verify that your machine does have these characteristics.
1.1.1 Description
BNUUUF02.C02 0000369286 A.5 A.6 A.35 11/16/21 8:39 AM Released
Washer-extractors wash linen using water and non-volatile chemicals then remove excess water
by centrifugal force. This washer-extractor is the mechanical type described below.
MWF63C_, MWF63Y_, MWF77C_, MWF77Y_ A machine represented by one of these par-
tial model numbers is a bottom-suspended (rubber springs), pneumatic tilt-to-unload washer-
extractors with grease bearings and inverter braking. The capacity can be 140 lb (63 kg) to
170 lb (77kg) depending on model.
1.1.2 Machine Identification
BNUUUF02.R01 0000369284 A.5 A.6 A.9 10/25/21 9:22 AM Released
Machine Data Plate — Find the model number and other data for your machine on the ma-
chine data plate affixed to the machine and described below.
Figure 1. Machine Data Plate
View of Data Plate (English text shown)
Legend
1. Model number.
2. Data that uniquely identifies your
machine. Refer to this data when
you speak with your dealer or
Milnor® about your machine.
3. Cylinder maximum rotation speed
in revolutions per minute
4. Cylinder volume in the units of
measure shown
5. Piped utility requirements
6. Electrical requirements
To Next Page
Loading...
Need help?
General