Pellerin Milnor Corporation iii
Figure 19 Proximity Switches These are examples. Your machine can look
different.....................................................................................................................32
Figure 20 Grease Ports for Grease-only Bearing Assembly .....................................................34
Figure 21 Grease ports for Door—Open Pocket Models. These are examples.
Your machine can look different...............................................................................34
Figure 22 Other Routine Maintenance Items on Each Side of MWF_ Air Tilt
Washer-extractor Models ..........................................................................................35
Figure 23 Suspension Components on Each Side of Rubber Spring-resting Wash-
er-extractor (see 3.3.3 About the Shock Absorberspage 35) ....................................36
Tables
Table 1 Guards and Related Components .............................................................................16
Table 2 Filters, Screens, and Sensitive Components ............................................................16
Table 3 Components that Become Worn ..............................................................................17
Table 4 Bearings and Bushings .............................................................................................17
Table 5 Motor Grease Schedule ............................................................................................18
Table 6 Mechanisms and Settings .........................................................................................18
Table 7 Contamination Types, Cleaning Agents, and Procedures ........................................18
Table 8 Lubricant Identification ...........................................................................................20
Table 9 Motor Grease Intervals and Quantities ....................................................................23
Table 10 Where to Put Marks On a Calendar .........................................................................24
Contents