MIMAKI CG-130FXII - Reset the Setting Values [SETUP RESET]

– 3.76 –
Reset the setting values [SETUP RESET]
Initialize the setting items and the parameters to the default values.
Procedure
1) Confirm the plotter in the local mode.
2) Push on the [FUNCTION] key.
3) Select [SET UP] by pushing the jog keys [
]
[ ].
4) Push on the [ENTER/HOLD] key.
5) Select [SETUP RESET] by pushing the jog keys
[
] [ ].
6) Push on the [ENTER/HOLD] key.
Initialize the setting items and the parameters.
7) Pushing on the [END] key three times to return
to the local mode.
CT1 020 050 0.30
SQUARE CUT <ENT>
COMMAND < ent >
SET UP <ENT>
SETUP RESET< ent >
IIc COMMAND : ent
CT1 020 050 0.30
FUNCTION