MIMAKI CG-160FXII - Select the Bumber of Pinch Roller to Use [PINCH ROLL.]

– 3.71 –
Select the bumber of pinch roller to use [PINCH ROLL.]
Set the number f pinch roller to detect when the sheet detection.
Set the [ROLL. SELECTION] is [ON], enable to select the number of pinch roller when sheet
detection.
Setting value
PINCH ROLL. : 2, 3 (CG-75FXII, CG-130FXII)
: 2, 3, 4 (CG-160FXII)
ROLL. SELECT : ON, OFF