- 12 -
Compositing the clear ink image with the color job
1.
In the job list, select the color job and the clear ink job.
• Click the “Composition” icon.
2.
Carry out the following
check.
(1) Is the clear ink job above the
color job in the job list.
• If it is not, use drag and drop
to change the positions
around.
(2) After the above check, click the
[Composite] button.
3.
The images will be compos-
ited.
• Printing will be carried out in either of the following ways, depending on the [Priority Policy] set-
ting on the ［Composition］ screen.
“Speed”: The color image and clear ink image are printed simultaneously using special
color overprinting.
In this case, the UV mode set for the color image is ignored and the conditions
set for the clear ink image are used.
“Quality”: The color image is printed first and the clear ink image is printed after.
In this case, the UV modes set respectively for the color image and clear ink
image are applied respectively to each image.
• In the case of glossy print, please refer toP. 13 “2.Select the clear ink’s effect: set the UV
mode”.
To Next Page
Loading...
