MIMAKI JFX500-2131 - B.setting Matte Print

- 19 -
b.Setting Matte Print
1.
In the job list, select the
clear ink job.
• Click the “Properties” icon.
• Click the [Setup] button in the
[Job attribute] field.
2.
Select the [UV Mode] tab.
• Make the settings as follows.
(1) Select “Matte Print” in the mode
list on the left side.
(2) Set “100%” for [llluminance].
Set “0 time” for [Additional UV
irradiation]
(3) Click the [OK] button.
(3)
(1)
(2)